ALYT Mobile Asphalt Drum Mix Plant

mobile asphalt drum mix plant

Mobile Asphalt Drum Mix Plant:

Model: ALYT20 ~ALYT80
Capacity: 20 t/h~80 t/h

Aimix ALYT series mobile asphalt drum mix plant can produce asphalt continuously.
Our mobile asphalt mixing plant has advantages of easy transportation, convenient install & disassemble, short transitions period.

Technical Parameters Of Aimix Mobile Asphalt Drum Mix Plant:

Production Capacity(t/h) 25-30 40 60 80
Total Power(kw) 50 75 123 140
Fuel Consumption 5.5-7.0kg/t(Fuel)
Effect of De-dusting Dust discharge concentration≤50mg/Nm3(Bag dust)
Volume of Cold Aggregate Storage 4.0m³×4
Unloading Height 3m
Control Mode Manually
Discharge Temperature 120-160℃

Main Parts of Aimix Mobile Asphalt Plant:

Cold aggregate bin

1. Cold Aggregate Bins
* Equipped with 4 grade bins for storing cold aggregates of different diameters.
* The ring-grade belt below each grade bin is equipped with driving motor & load cell which have frequency converter. It can be remotely controlled in the control room to achieve accurate ratio of cold aggregate.
* Aggregate conveyor belt transfers the cold aggregate on each ring-grade belt to the small vibrating screen. The aggregate diameter larger than 40 mm will be screened out and the remaining qualified aggregates will be transport to the inclined belt conveyor and then to the drying drum.

mobile asphalt dry drum

2.Drying System & Mixing System
* The drying drum is consist of 2 support rollers, 2 support wheels, 1 drive roller, 2 anti-offset wheels, a cylinder and shovel plates. Dry support raceway and support wheels are used to hold the drum. The motor with reducer rotates to drive the raceway. Finally the drum is driven to rotate stably and evenly.
* The shovel plates takes the cold aggregate to the highest point and drops to forming a wall where the fire will go through to dehydrate the materials.
* The drying drum with insulation can reduce the heat loss, save the fuel & cost.

Burning System

3.Bitumen Supply System
* Direct heating asphalt tank is cost effective. It can realize fast heating and keeping liquid statues of bitumen inside the tank. And the temperature is controlled.
* Asphalt pump is driven by motor with frequency converter and controls the added bitumen quantity.

Dust Remove System

4.Dust removing system
* Better dust removing effective with less dust emission, more environmental friendly.
* Muti ways of dust remove for clients to meet their needs.

Finished Asphalt Elevator

5.Finished Asphalt Elevator
* The elevator takes finished asphalt to the storage silo.
Chain plates, chain wheels and hoppers are made of high strength & high resistance material which has long working life.
* The drying drum, elevator and finished asphalt storage silo is designed on the same mobile apartment. This modular structure is easy to transport and install.

Finished asphalt storage silo

6.Finished Asphalt Storage Silo
* The silo is designed at a certain height which is easy for the truck loading.
* Pneumatically opened storage silo is switch conveniently. There is a level gauge in the warehouse to effectively prevent flashing and a temperature sensor inside to learn the temperature of the finished material in real time.

Control System

7.Control System
* PLC control system is easy to operate.
* Manual or semi automatic control, higher automation less labor cost, less operation cost.
* The main motor current and frequency values, finished material and cold aggregate temperature can be convenient set by the panel.

Mobile Chassis

8.Mobile Chassis
The mobile frame can be installed under the main module, which is convenient to transport, quick to relocate, and can be re-produced in a short time after the transition.

Features of Aimix Mobile Drum Asphalt Plant:

  • Modular structure & low room occupied easy to located in a narrow or confined area.
  • The plant is consisting of four main modulars; each with a mobile chassis, highly mobile, convenient for transportation and relocation.
  • The ring-grade belt below each grade bin is equipped with driving motor & load cell which have frequency converter.
  • It can be remotely controlled in the control room to achieve accurate ratio of cold aggregate.
  • Drying & mixing all finished in drying drum for low heat loss. Advanced inner structure for fast heating and better mixing.
  • Low investment & Cost-effective.

Successful Cases Of Aimix Asphalt Mixing Plant:

Aimix Asphalt Plant In Russia

Aimix Asphalt Plant In Russia

Aimix Mobile Asphalt Plant In Kazakhstan

Aimix Mobile Asphalt Plant In Kazakhstan

Aimix Asphalt Drum Mix Plant In Indonesia

Asphalt Drum Mix Plant In Indonesia

Certifications of Aimix Group:

CE certification
GOST certification
environment certification
enterprise certification

Aimix Loading & Delivery In Indonesia:

Aimix delivery & installation

Aimix Group Clients Visits:

    How to get price and support

    In order to protect your legitimate rights and interests, please buy the products of Aimix Group from formal channels. Your can leave a message or call us by phone: +86-18569982570. Our sales manager will give you a detailed reply.